KFX 450 HQ Forum banner

1 - 3 of 3 Posts

Registered
Joined
2 Posts
Discussion Starter · #1 ·
Hello, just picked up a '08 kfx450 for an amazing price considering today's market. Trans was locked up, turns out it was a broken gear from some Loose bearing rollers floating around in the case from a prior tear down I suppose 馃し. Anyways, figured wile Ive got this engine torn down.. might as well throw some goodies in it! Purchased a wiseco 12.4:1 piston, hot cams stage 3 cams, arp head studs, hmf exhaust, procom ecu and fci intake. My question is, will setting 10 on pro com be sufficient for the stage 3 cams, higher compression piston? Anyone have custom map they're willing to share with this setup already?

As always, thank you for any input
 

Registered
Joined
2,097 Posts
Hello, just picked up a '08 kfx450 for an amazing price considering today's market. Trans was locked up, turns out it was a broken gear from some Loose bearing rollers floating around in the case from a prior tear down I suppose 馃し. Anyways, figured wile Ive got this engine torn down.. might as well throw some goodies in it! Purchased a wiseco 12.4:1 piston, hot cams stage 3 cams, arp head studs, hmf exhaust, procom ecu and fci intake. My question is, will setting 10 on pro com be sufficient for the stage 3 cams, higher compression piston? Anyone have custom map they're willing to share with this setup already?

As always, thank you for any input
Map 9
Should be sufficient

return the fmf and get a dasa, empire, barkers, rossier, empire
 
1 - 3 of 3 Posts
Top