KFX 450 HQ Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
There is a plug connector under the back end of where the gas tank is, that plugs into the top of I suppose the throttle body area. It has TWO wires (white/red & blue/red) The white wire was severed - It broke off inside the plug connector. The quad would try to start, but not turnover.

I soldered the white/red wire back on and the quad started right up after that.
That plug connector is damaged and frail now. I would like to cut both wires, crimp on new ends and side the two wires into a NEW plug connector.

What is this plug connector called? (it has Y17) on it?
Where can I get a new plug connector?
What purpose do the TWO wires mentioned above serve? Obviously the white/red help my quad start (turn over) - I think it runs to the ECU.

??
 
1 - 2 of 2 Posts
Top