KFX 450 HQ Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
New to the sight learned much here from random reading. 08 450 was a basket case now runs great due to the info learned on here. Thanks
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Thanks for the welcome. A lot of the issues I had were mainly resolved by a lot of your post. Started out with bad Ecu , then failing fuel pump , and fuel pump regulator. Haven’t had it long but seems to pull hard. Just curious how they run compared to a slightly modified banshee, pipes ect. Right now just has a yoshi. Slip on, procom, and uni filter with lid off. Plan on adding fci, and 13 tooth front sprocket for woods. Cams will come later.
 

·
Registered
Joined
·
1,967 Posts
Welcome!

They run well in the woods.

You will want 14/38 or even 15/38

13/38 has a ton of wheel spin which slows you down

Especially once you get a fci
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
Thanks for the info. I'll pry just keep it at 14/38 then. Just not used to a tall first gear. Used to the old days of a 400 ex cruising around like a tractor in first lol.
 

·
Registered
Joined
·
1,967 Posts
Ya 1st gear is so tall. Then the rest are normal
 
1 - 7 of 7 Posts
Top