Joined
·
16 Posts
Hello everyone i am a new member and i have been using this forum to look up stuff for my build for some time now. I am a medically retired army vet with one tour to iraq. I am currently rescuing a 08 that is getting a full restoration. Currently getting everything stripped down to powder coat.
Current parts (on order/arrived):
Roll design mx a arms
Stage 5 elkas front and rear
Walsh steering stem plate bearing
Lone star racing standard hight steering stem
New extended stainless steel brake lines
Black rental fat bar
Green fatbar pad
Odi half waffle lock ons
New harness and all new relays
Kms roll over sensor delete
Moose kill tether (no splicing required)
Hot rods complete bottom end with heavy duty crank
Athena complete cylinder kit with 12:8:1 piston
Stage 2 hot cams intake and exhaust
Fuel customs intake
Power commander V
Hmf blackout full exhaust
Rental 15t front sprocket
Rental stock gear rear sprocket
Rental z ring gold chain
Dura blue eliminator 2+2 rear axle
New oem rear rotor
All new brake pads
Dwt championship in a box kit
Itp quad cross front and rears
All new oem green plastics and seat
Full Custom nsyle graphics
Tm design works plastic skid
To be ordered:
Fourwerx carbon fiber hood and underhood
Factory 43 front bumper with number plate
Factory 43 evo nerfs
Percision elite steering stablizer
Percision anti vibe clamps
Head port and polish (5 angle radius +1 valves)
Streamline break line clamps
Rad cap with temp gauge
Gas cap with breather
Quadtec custom seat
Possible down the road:
New higher compression piston 13:8:1 or 14:1
Walsh lowered sub frame
Walsh mx swing arm
The wiring harness is getting stripped and i am going to get rid of the head lights, tail light, and any unnecessary items even the stock control assembly. I am sure i have forgot to mention something because of such a list
Current parts (on order/arrived):
Roll design mx a arms
Stage 5 elkas front and rear
Walsh steering stem plate bearing
Lone star racing standard hight steering stem
New extended stainless steel brake lines
Black rental fat bar
Green fatbar pad
Odi half waffle lock ons
New harness and all new relays
Kms roll over sensor delete
Moose kill tether (no splicing required)
Hot rods complete bottom end with heavy duty crank
Athena complete cylinder kit with 12:8:1 piston
Stage 2 hot cams intake and exhaust
Fuel customs intake
Power commander V
Hmf blackout full exhaust
Rental 15t front sprocket
Rental stock gear rear sprocket
Rental z ring gold chain
Dura blue eliminator 2+2 rear axle
New oem rear rotor
All new brake pads
Dwt championship in a box kit
Itp quad cross front and rears
All new oem green plastics and seat
Full Custom nsyle graphics
Tm design works plastic skid
To be ordered:
Fourwerx carbon fiber hood and underhood
Factory 43 front bumper with number plate
Factory 43 evo nerfs
Percision elite steering stablizer
Percision anti vibe clamps
Head port and polish (5 angle radius +1 valves)
Streamline break line clamps
Rad cap with temp gauge
Gas cap with breather
Quadtec custom seat
Possible down the road:
New higher compression piston 13:8:1 or 14:1
Walsh lowered sub frame
Walsh mx swing arm
The wiring harness is getting stripped and i am going to get rid of the head lights, tail light, and any unnecessary items even the stock control assembly. I am sure i have forgot to mention something because of such a list