[mwhite2020]

Need a pcv map for full yoshi exhaust and FCI w/out box. Also, when i decide to install the stage 2 hotcams and dynatek coil, do i need to have pcv remapped? Thanks in advance!!

 

[utkfx450]

after cams and coil... yes

 

[mwhite2020]

after cams and coil... yes

Thanks. I'll just wait until i get those parts installed first.

 

[zr_smith]

http://www.kfx450hq.com/forums/engine-efi-drivetrain/15903-need-pc5-map-please.html

I have the PCV and AutoTune, I just started with a map that seemed closest to my set-up then had to go back and balance the map after every couple rides. I highly suggest getting the AutoTune because it will dynamically adjust your map for you.

 

[mwhite2020]

Still learning about the PCV with autotune. I have both, but the powercommander website doesn't have my current mods (FCI w/out box and full yoshi exhaust). It will probably be awhile before I get to a dyno for a custom map. I'm assuming that the autotune will just keep me close to my map settings at all times. If anyone has a map for my mods please send!! [email protected] thanks!!!

 

[utkfx450]

the autotune will build you a map