KFX 450 HQ Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
In the process of rebuilding my 2009 KFX450R and my valves have a lot of build up on them should I just clean them or replace them? And if I need to replace them is that a pain in the butt?
28094
 

·
Super Moderator
Joined
·
9,617 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Thank you Dust Devil. I cleaned them, they look much better. I ended up using carb cleaner and a flat carbon scraper I use on my AR15's before I saw your reply. I used the scraper, very carefully, on the valves only and the carbon wiped off the aluminum with a rag. I did order a spring compressor as I wanted to replace the valve seals anyway.
 
1 - 3 of 3 Posts
Top