KFX 450 HQ Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
Whats up Guys cisco from California

Mostly ride Pismo and some trails

Bike is completely stock looking for suggestions

Needs big3/suspension/chain/sprockets/ etc..
 

·
Registered
Joined
·
35 Posts
Discussion Starter #2
Quad experiences hard starts every now and then

Bike shuts off when kicked down to 1st gear when cold.

Looking for a new set of wheels and skat trak paddles

LMK if you have any for sale
 

·
Registered
Joined
·
1,967 Posts
Welcome!

I’m from northern ca.

I’d suggest an Fci intake with box for sand.

Dasa, empire, sparks, barkers, Yoshi.

Yoshi if your worried about noise.

Then a simple 3 button tuner or if you want a dyno tune a pcV.

I’d suggest just a race tech dual rate spring setup up front. Then a GT thunder XC link. I recently Installed those two and am very happy with it.

If you 200 lbs or under use the stock rear spring.

If you weigh more I would suggest a race tech spring. I can suggest the spring based on weight.

Stock sprockets for sand. 14/38

If your running 21” rears in the sand switch to 13/38

You will loose 1-2mph top speed but have better bottom end to spin them up.

I might have some 20x10x10 9 paddle skats for sale in 4-5 months....but that’s a ways out.

I’d suggest turning the idle knob up 4 turns to help bottom end flare outs.

It should be 20-24 clicks out.
 
1 - 4 of 4 Posts
Top