KFX 450 HQ Forum banner

fci

  1. Need a juice box pro map for mods

    Engine/EFI/Drivetrain
    Hi everyone, it's been awhile since I've been on here. Hope all is well. I finally got my 2009 back from getting powder coated and modded. I'm now currently looking for a map for my mods. First off I am from Maryland. I have a 2009 kfx450r with fci no lid. Full dmc dual exhaust. I ride mostly...
  2. Measurements of an FCI? PLEASE...... :)

    General Discussion
    I was wondering if anyone had an FCI off of their quad and could tell me the measurements. (and maybe later, the box). I think I'm gonna have one 3d printed. Id rather pay 20 bucks and buy a filter rather than spend 200.First, I need the overall length (imagine the fat and is sitting flat on a...
  3. Advice on fuel controller!!

    Engine/EFI/Drivetrain
    Hi, im new to the forum and have a 2010 kfx with a yoshimura slip on and uni Ar filter. I would like to upgrate to a FCI and a fuel controller. i have no place to do a dyno and cant aford a power commander V with auto tune! So what controller do you recomend that would be user friendly or that...
  4. WTB box for FCI

    For Sale / Wanted
    Looking for an airbox for my FCI. Going to do some trail riding at a new riding spot and I dont know what the conditions are like there. Thanks
  5. WTB FCI w/box

    For Sale / Wanted
    Wanting to buy fuel customs intake with the box. Just seeing whats out there. Trying to build on a budget.
  6. KFX450R Air Box Airbox Intake CFM Performance

    Engine/EFI/Drivetrain
    hi i have 2 kfx 450s one has a fci intake w box a procom and full exhaust the other has a full exhaust the kawi adj ecu and a fuel controller but a completely stock intake and airbox setup. I know the fci is the best but i like the cfm setup anyone have expericence w it and how much of a drastic...
  7. Wtb: FCI, 08 KX Cams, Procom

    For Sale / Wanted
    Looking to get step it up for spring here in MN, anyone willing to sell a fuel customs intake, procom ecu, or 08 KX cams would be greatly appreciated. I'm not looking to lowball, no reasonable offer would be refused. I just can't justify spending money on this stuff new when it works just as...
  8. kfx vs trx 400?

    General Discussion
    I installed my fci and procom last night and told my friend about it. He's the type that has to have the fastest everything. Truck, fourwheeler, bike... doesn't matter. So now he's saying that i wasted $500 on parts because he says he can outrun me on his 08 TRX 400. All it has on it is a Curtis...
  9. new map for yosh RS2, PIM2, stage 2 hotcams, FCI.

    Dyno/Tuning Room
    i am installing all of it at the same time, but have heard that the FCI is hard starting without a map. i am going to have to break in the cams with the intake installed as well.... kinda got rid of the stock intake already. can someone hook me up? thanks.
  10. fci prices

    General Discussion
    i got a procom ecu for Christmas so now im looking for an fci. but $325 is A LOT of money. anyone know where i could find the best prices on one with a box? green tube if possible. thanks in advance.
  11. WTB fuel customs intake

    Engine/EFI/Drivetrain
    I'm thinking about buying a fci, my main questions are is this the one to get, I do mainly trail riding, there is mud and sometimes tons of it, so i'm thinking i should buy the one that comes with a box. I have searched a little bit and it seems that they are all around 325 for with a box. Has...
  12. Air intake

    General Discussion
    I have a 2009 kfx 450r with a fmf factory 4.1 silencer with ss mid-pipe and a fmf efi power programmer. I am looking for a intake to add some additional power. my main questions are what intakes will work with my setup and I also need one that will work for trail riding, going through mud, water...
  13. Good place to have my quad dynod in washington?

    General Discussion
    I have a new exauhst and the fci coming, I have a fuel programmer. Just need to have it fine tuned. Anybody know of a place in western washington to have it done?
  14. DMC Programmer settings w/ FCI, Dual exhaust

    Member Introductions
    Hi all, I'm new to this forum, the KFX 450 and tuning ATVs. I recently bought a used '08 KFX with a DMC dual exhaust system and programmer installed, and stock box/no lid with K&N filter. I just added a FCI Intake w/ box and don't know where to begin with the DMC settings. Programmer had...
  15. Need map for FCI no box, Jardine RT99 full exhaust, PCIII

    Dyno/Tuning Room
    Need a map for my setup. Please help
  16. Fuel customs intake for $254!!! W box!

    Important Information
    I thought I would share with you guys since I have had so much advice given to me from this site. I just picked up my fuel customs intake with box from tqsatv.com for $264(after shipping and handling). When checking out type "fci" as your promotional code and it will knock off $35!! Enjoy...
  17. (Need Map) FCI no box, Dasa Full system?

    Dyno/Tuning Room
    I have a FCI with No Box + outerwears and DASA full system 13inch i need a PC3 map i see there is one in the sticky. but not sure if its the for a box or no box or if it even matters any help? look forward to my FCI review after New Years in Dumont:D
Top