KFX 450 HQ Forum banner

adjustment

  1. how do you guys tighten your chain?

    General Discussion
    welp first off i dont have the tool.. all i got with the quad were some extra parts title and registraion no manual or special tools. took me a while to figure out how to adjust my chain i ended up taking vice grips and locking it on two teeth of the axel adjuster and i ended up scrachting one...
  2. Chain adjusment when switching to a 15T front sprocket

    Engine/EFI/Drivetrain
    I switched to a 15 tooth front sprocket because mostly everyone says it is better but now i have a problem getting the right slack in the chain. its at the point where one extra link is too long and if i take it out its too short. when i turn the adjuster clockwise(toward you if your behind...
  3. TPS adjustment Q

    Engine/EFI/Drivetrain
    When you guys are setting your TPS, the service manual says, "Let bike heat up thoroughly, then check." Well I check the output voltage at 3 different times, here are my results. Bike cold - .44 After running for 2 minutes - .58 After running for 7 minutes (coolant fan running) .65 Now I...
Top