Fuel customs power stack filter - Kawasaki KFX450 Forum :: KFX450HQ.com
Engine/EFI/Drivetrain Discuss engine, fuel injection, air intake, and drivetrain modifications here.

 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 01-02-2020, 03:19 PM Thread Starter
Senior Member
 
blue99stroker's Avatar
 
Join Date: Jan 2014
Location: Northern California
Posts: 1,939
View blue99stroker's Photo Gallery(0)
I recently saw this filter listed. Garret said it fits the box and non box versions...And it actually fits in the box better because it’s slightly shorter.

He said everything that’s ran this filter has seen atleast a 1hp gain. Likely more on a built machine with head work

It comes with a new outerwear.

A good gain for an already impressive system. Can’t beat a 1hp+ gain for 75$

I’ll be getting one soon. But likely won’t ride until April...
http://shop.fuelcustoms.com/product-p/fuel01.htm

08 KFX450r- DASA, FCI, Stg 2 Hotcams, Wiseco FI, Dynatek Coil

Race Tech dual rate front springs, GT thunder XC Link and Race tech spring, LSR +2 Arms and LSR Axle

Poly Case Saver, Streamline Stabilizer, PRM Skidplates, Pro Armor Bumpers, Tusk Heel Guards, IMS 3.7 tank, 6K HID

Next up: Dasa Port Job, JE Pro 12 12.8 piston
blue99stroker is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 01-03-2020, 04:40 AM
Super Moderator
Premium Member
 
Dust Devil's Avatar
 
Join Date: Oct 2009
Location: Lake Havasu city, Arizona
Posts: 9,533
View Dust Devil's Photo Gallery(0)
Nice find...Thanks...!!

Garret was a member in the past...

Check with Site Sponsors "First"

(Immortal ATV)
Todd
http://immortalatv.com
1-(800)380-9646
[email protected]
Save 5% off $100 or more, use coupon code: KFX450HQ

(KB Motor-sports)
Website:
http://www.kbmotorsportsonline.com

(Discount Tire)
At The Store: www.discounttire.com
To Your Door: www.discounttiredirect.com
Sales and Technical: 1.888.459.4080




Dust Devil is offline  
post #3 of 8 (permalink) Old 01-03-2020, 08:41 AM Thread Starter
Senior Member
 
blue99stroker's Avatar
 
Join Date: Jan 2014
Location: Northern California
Posts: 1,939
View blue99stroker's Photo Gallery(0)
I was pretty stoked!

One thing that’s great about it is it fits in the box even better. It’s slightly shorter

He is a member on the Facebook group!

08 KFX450r- DASA, FCI, Stg 2 Hotcams, Wiseco FI, Dynatek Coil

Race Tech dual rate front springs, GT thunder XC Link and Race tech spring, LSR +2 Arms and LSR Axle

Poly Case Saver, Streamline Stabilizer, PRM Skidplates, Pro Armor Bumpers, Tusk Heel Guards, IMS 3.7 tank, 6K HID

Next up: Dasa Port Job, JE Pro 12 12.8 piston
blue99stroker is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 01-03-2020, 07:13 PM
Junior Member
 
neon_x's Avatar
 
Join Date: Oct 2019
Location: Braga,Portugal
Posts: 23
Garage
View neon_x's Photo Gallery(0)
I have a similar to this one is only from K&N
neon_x is offline  
post #5 of 8 (permalink) Old 01-03-2020, 09:43 PM Thread Starter
Senior Member
 
blue99stroker's Avatar
 
Join Date: Jan 2014
Location: Northern California
Posts: 1,939
View blue99stroker's Photo Gallery(0)
It wouldn’t surprise me if k&n Manufactures it.

Is your K&N 8 ply as well?
One thing I like about fuel customs is they are 8 ply filters and come with the outwear.

Did you notice any positive gain with the filter?

08 KFX450r- DASA, FCI, Stg 2 Hotcams, Wiseco FI, Dynatek Coil

Race Tech dual rate front springs, GT thunder XC Link and Race tech spring, LSR +2 Arms and LSR Axle

Poly Case Saver, Streamline Stabilizer, PRM Skidplates, Pro Armor Bumpers, Tusk Heel Guards, IMS 3.7 tank, 6K HID

Next up: Dasa Port Job, JE Pro 12 12.8 piston
blue99stroker is offline  
post #6 of 8 (permalink) Old 02-06-2020, 12:51 PM Thread Starter
Senior Member
 
blue99stroker's Avatar
 
Join Date: Jan 2014
Location: Northern California
Posts: 1,939
View blue99stroker's Photo Gallery(0)
here is the new filter. Going to mount it later
Attached Thumbnails
Click image for larger version

Name:	1AE52D09-CA4B-48C7-BBAC-8060F40FB688_1581007871174.jpeg
Views:	8
Size:	592.7 KB
ID:	24826   Click image for larger version

Name:	44EA6CB4-A15B-41A9-98C8-88752C3139BC_1581007884790.jpeg
Views:	6
Size:	2.58 MB
ID:	24828  

08 KFX450r- DASA, FCI, Stg 2 Hotcams, Wiseco FI, Dynatek Coil

Race Tech dual rate front springs, GT thunder XC Link and Race tech spring, LSR +2 Arms and LSR Axle

Poly Case Saver, Streamline Stabilizer, PRM Skidplates, Pro Armor Bumpers, Tusk Heel Guards, IMS 3.7 tank, 6K HID

Next up: Dasa Port Job, JE Pro 12 12.8 piston

Last edited by blue99stroker; 02-06-2020 at 02:51 PM.
blue99stroker is offline  
post #7 of 8 (permalink) Old 02-06-2020, 07:52 PM Thread Starter
Senior Member
 
blue99stroker's Avatar
 
Join Date: Jan 2014
Location: Northern California
Posts: 1,939
View blue99stroker's Photo Gallery(0)
Garret is working on a custom box for me. The filter doesn’t quite fit with the box. But for the dunes I’m going to run no box now.

The filter flange is very tight! But it wasn’t too bad to get on.

Can’t wait to test it out.

Maybe if i get a dasa shorty I can hit 50hp without touching the head 🤷‍♂️😆
Attached Thumbnails
Click image for larger version

Name:	83D15178-F4C1-4222-854A-6879249FB670_1581033174885.jpeg
Views:	6
Size:	1,016.8 KB
ID:	24836   Click image for larger version

Name:	F5B8FF9A-D197-4D23-95EF-E82D5C57E87C_1581033190669.jpeg
Views:	5
Size:	937.0 KB
ID:	24838   Click image for larger version

Name:	03DF43EF-C6D7-49EE-87E9-42FA0D2C7B38_1581033205046.jpeg
Views:	7
Size:	2.40 MB
ID:	24840  

08 KFX450r- DASA, FCI, Stg 2 Hotcams, Wiseco FI, Dynatek Coil

Race Tech dual rate front springs, GT thunder XC Link and Race tech spring, LSR +2 Arms and LSR Axle

Poly Case Saver, Streamline Stabilizer, PRM Skidplates, Pro Armor Bumpers, Tusk Heel Guards, IMS 3.7 tank, 6K HID

Next up: Dasa Port Job, JE Pro 12 12.8 piston
blue99stroker is offline  
post #8 of 8 (permalink) Old 02-06-2020, 09:16 PM
Junior Member
 
FranciscoG831's Avatar
 
Join Date: Sep 2019
Location: Cen-Cal
Posts: 26
View FranciscoG831's Photo Gallery(0)
Badass filter . I need it just got monster shorty exhaust . What does it take to make 50hp? Pismo this weekend first ride after ditching stock pipe
Attached Thumbnails
Click image for larger version

Name:	E19051A9-047A-42BD-A178-85045942AA8A_1581038108553.jpeg
Views:	4
Size:	1.56 MB
ID:	24842  
FranciscoG831 is offline  
Reply

  Lower Navigation
Go Back   Kawasaki KFX450 Forum :: KFX450HQ.com > KFX450 Performance > Engine/EFI/Drivetrain

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki KFX450 Forum :: KFX450HQ.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome