Partin or Tradin Out Factory Monster Energy KFX450R Race Quad ....Needing XC Parts...

motorcrossboy183 · #1 (**permalink**) 12-29-2009, 03:49 PM

Couldnt sell my actual factory russell shumakers 08 race quad so im partin out my mx parts to set it up for xc racing.....willing to do some tradin on parts just tell me wat u got and condition and wat u want.....email me at motorcrossboy183@hotmail.com if no answer or reply on here....offer up everything mx related is gotta go.....aarms and axle may already be gone but here is a parts list of wat the quad has done to it and pics of it....thanks and if u need to offer me somin asap u can call or txt me at 606 682 8969....thanks

Russell Shumaker’s Factory, Pro Circuit, Monster, Kawasaki KFX 450 Race Quad

Motor:
-Factory Pro circuit motor
-Ported, Polished
-Pro circuit valves, springs, retainers, ect
-Brand New CP 14.1 High compression Piston
-Tumbled Transmission
-Hinson Clutch basket
-Hinson BTL clutch
-Hinson clutch cover
-Pro Circuit Titanium Race exhaust
-Need a Lower Compression Piston So id trade mine to a 13.1 CP or lower compression piston....mine only has prolly 5-6 hours on it and its suppost to be a hard to find product because of the high compression....thanks

Electrical:
-Factory race wire harness
-Power Commander Dyno Tuned
-Pingel kill switch
-Custom Key mount

Intake:
-Custom Pro Circuit Half AirBox
-K&N filter (Huge)
-Hetrick race intake (larger)
-Bored throttle body
-550cc STI Pink injector
-Need a new Complete Intake...Like to have Fuel Customs Intake With Airbox and maybe selling or parting oversized injector...

Chassis
-Custom Factory Polished frame and swing arm
-Custom Factory shortened subframe
-Custom factory swing arm with custom welded on chain guide
-Black motor mounts
-Fox factory tuned suspension
-Roll Design light weight a-arms with Titanium pivots (made only for Kawasaki team)
-Roll Design light weight steer stem 1/2" taller
-Machined spindles to reduce bump steer ( factory only)
-Custom rock guards
-StreamlineGreen steel braided brake lines
-Streamline billet brake line clamps
-Braking front master cylinder
-Machined steer stop
-Elka steering stabilizer
-Black Renthal handlebars
-Renthal Grips
-Quad Tech carbon fiber hood
-Quad Tech carbon fiber shrouds
-Quad Tech seat and custom seat cover
-Carbon fiber skid plate
-RK chain
-Renthal front and rear sprocket
-Lonestar axle
-PWR radiator hoses
-Custom radiator shrouds (with monster stickers)
-Doglas Wheels (Black)
-DG light weight nerf bars (factory only)
-DG light weight bumper and grab bar (factory only)
-Custom seat pin brackets
-Custom seat pins with cotter pins
-Factory race team Graphics
-PWR engine breather hose (Blue)
-2 Sets of barely used ITP Quadcross Pro Tires
-Need the Nerfs, Bumper, Grab Bar, Wheels and Tires, Maybe the 1/2" taller stem, Front Braking Master Cylinder, Carbon Skid Plate all need to be gone or traded for xc stuff....prefer IMS ROLL an ROLL DESIGN STUFF......also need Larger IMS Tank and GT Thunder Sprocket and Disc Guards......Please Contact me or email me if u need any of these parts or if u have any of the parts i need......thanks.... Sorry but cant get the pics on here for some reason.....have pics in one of my other posts so jus check there or email me and ill send pics....thanks

**fastjunkie131** · #2 (**permalink**) 12-30-2009, 06:42 PM

have long travel elka front shocks set up for xc on roll design arms and elka rear shock would trade for fox shocks also have 3+2 front hiper tech 3 beadlock wheels

motorcrossboy183 · #3 (**permalink**) 12-30-2009, 06:48 PM

Quote: Originally Posted by fastjunkie131

have long travel elka front shocks set up for xc on roll design arms and elka rear shock would trade for fox shocks also have 3+2 front hiper tech 3 beadlock wheels

keeping shocks...already have aarms and axle traded for roll design xc aarms and lsr xc axle.....ill need 4 1 offset front but i may already have my wheels traded for hipers...