KFX 450 HQ Forum banner

Reaction score
93

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews Media Albums About

  • · Registered
    Joined
    ·
    0 Posts
    hi can you please send me fsm for 09 kfx 450r @ edclineff@yahoo.com -thank you I am new to fourms but i seen your thread sticky on fsm and all links are down figured id just message you thanks again. also sent you a p.m

    · Registered
    Joined
    ·
    45 Posts
    Hello , I seen your post about the service manual. May I have a copy please. dorseyterrance@gmail.com thank you very much

    · Registered
    Joined
    ·
    2 Posts
    Hey dust devil, merry Christmas and sorry for the random message but I was reading a post in which you were about to go into explaining the installation of the decomp spring and pin in the exhaust camshaft but then never did - I was just wondering if you ever wound up doing a write up on it, I talked to a guy Neels who gave me a few good tips but I just wanted to see if there were any tricks because I am having a tough time getting the spring and pin in with flat heads - thanks again

    · Registered
    Joined
    ·
    34 Posts
    Hey any chance you can email me a service manual (boost190@yahoo.com )also what is the procedure for setting the tps. I havent been able to find anything to exactly describe what you do. Thanks so much

    · Registered
    Joined
    ·
    0 Posts
    Can u email me the service manual to the 2008 kfx450r please. My email is gammon.billy@yahoo.com

    · Registered
    Joined
    ·
    0 Posts
    hey i seen your post about the service manual. Could i get a copy please. heatscore87@gmail.com thank you very much

    · Registered
    Joined
    ·
    0 Posts
    Hey man I'm new to this form and quading for that matter. I came across you have a service Manuel for a kfx 450r. Would it be possible if you could send it to me. I'm having some problems with my quad. Maybe it will help.. If you could help that would be great....
    Thanks

    · Registered
    Joined
    ·
    15 Posts
    You seem to know a lot about mods. I just put full exhaust, fci, and hotcams 2 on.
    Will I be robbing my self of any power if
    I buy a dynotec fuel controller for it?

    · Registered
    Joined
    ·
    44 Posts
    Hey Dust Devil,

    I was searching around for a service manual for my KFX450R and i noticed that you had a link for one. I went to the link and it just sent me to icloud. Is there anyway i can get ahold of it somehow? Thanks in advanced
    atseibert74@gmail.com

    · Registered
    Joined
    ·
    0 Posts
    Hey, I just got a 08 kfx 450r wen it's cold it runs like a beast but.....wen it warms up...at full throttle it's like it lost power any idea's what it might be?

    · Registered
    Joined
    ·
    1 Posts
    Hey DustDevil,
    New to the forum and just picked up a 2010 Kfx450r for my son who has a 2011 raptor 350. Plan on hitting the trails in the spring. I saw you have a service manual and was wondering if you could send same. Would greatly appreciate it. Send to gjconstant@optonline.net

    · Registered
    Joined
    ·
    1 Posts
    Hello! I need a service manual for my '08 KFX 450R. Please send to biserstefanov@gmail.com
    Thanks a lot!

    · Registered
    Joined
    ·
    17 Posts
    You are a wealth of information and a hell of a nice guy. I'll start ordering and working with your suggestions and advice. I'll let you know how it goes once I make some progress. Thanks again Dust!!

    · Registered
    Joined
    ·
    17 Posts
    Hi Dust, do you think replacing my carb would fix the idle issue I'm having? If so do you think it's pretty easy to install. I've seen new ones out there for under $200 which is cheaper than taking it in for a re-build. Was thinking of the new carb a dyno jet and a new full exhaust that you showed me. All this would at least I think would improve my ride. Thanks Dust. Have a great Wednesday !

    · Registered
    Joined
    ·
    17 Posts
    I saw a post today while search for a service manual, and I saw that you were the man to talk to about it. I was wondering if you still had this available and if you could email it to me when you get a chance that would be awesome. My email is jack.r.mace@gmail.com thank you

    · Registered
    Joined
    ·
    4 Posts
    Hey do you have a map for a dasa, fci, stage 2 cams and 12.8-1 ?! There isn't a dyno with 600 miles of me
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top