H.I.D kits

kfx4fifty · #1 (**permalink**) 07-18-2010, 08:20 PM

Has anyone tried out the hid kits from ddm tuning? Any info would be great. I have them for my car there awesome quality for 55 bucks, but just wanted to know if anyone has tried them on their kfx450, and are they plug and play thx!

DirtyDawg · #2 (**permalink**) 07-19-2010, 01:29 AM

Heres where I got mine BURKE Moto Pros items - Get great deals on Category 1 items on eBay Stores!. They are plug-n-play, and the quality is excellent. 2 years and not a single problem. If I remember right they have a 5 year unconditional warranty.

burkemotopros · #3 (**permalink**) 08-27-2010, 03:32 AM

Thanks for the bump Dirty Dawg

tazz3069 · #4 (**permalink**) 08-27-2010, 09:11 AM

which ones did you get? They have two kinds. One for $75.00 for slim ballast and one for $50.00 Replacement kit. They say that they are plug and play. What is the difference between them?

AZkfx450rider · #5 (**permalink**) 08-27-2010, 12:03 PM

dirty dawg, i bought a kit before that said it was plug in play, when i got the kit it was not but i had already taken everything apart so i just spliced them and then soldered them and heat shrink over them, when i have them both plugged in they flicker and go out, when i plug in 1 it works fine, unplug and do the other it works fine, someone said i need a relay to make them work right, did you wire up a relay?

cousinit · #6 (**permalink**) 08-27-2010, 12:31 PM

Also have the burke kit, slim ballast.. Unplug your stock wires coming from the dust covers, and plug the hid wires in, that's it for wiring.. The only work is mounting the ballasts, inserting the bulbs and cutting the dust cover, to remove the old wires.. Insert the new wires, reseal the covers and your done... If you stall one light may go out, turn them off and back on, to get them both on again... Had them for about a year and still pleased...

AZkfx450rider · #7 (**permalink**) 08-27-2010, 02:45 PM

ya thats what my lights used to do, now they just flicker and both go out, i unplugged one of them and the 1 runs fine now,

cousinit · #8 (**permalink**) 08-27-2010, 03:37 PM

Not sure if the Burke kit has a relay or needs one.. Anyone??? Mine don't flicker, just if i stall, one goes out sometimes.. I think others have the same issue. Ononewheel has a relay on his set up for that reason.. I'll mention this thread to him and maybe he'll chime in..

bdr450r · #9 (**permalink**) 08-27-2010, 04:16 PM

I have the Burke kit and no relays... been a great set of lights. The DDM kit I run in my Toyota 4x4's Lightforce lights. They'll light up a fence a 1/4 mile away.

DirtyDawg · #10 (**permalink**) 08-27-2010, 06:41 PM

The BurkeMotoPro HID lights are a complete lighting system and are exactly what it says... Plug and Play. I have the slim balast set on 2 of my quads. As far as relays,1 set has them and the other doesn't. You can talk to Jim (he is a member of this forum now) and find out the difference from him better.I will say they are one of the best investments I have made on both quads. This last weekend I went to Pismo for a few days. On Sunday night, some drunk fool went ripping thru our camp and hit my 450. He hit it on the left front, and busted my headlight. The HID's still work perfect even though the headlight housing is busted to hell. I think that kinda goes to show the system will take a licking and still keep on ticking. For the price, quality, and service I think BurkeMotoPros delivers all they say and then some.

Jim, do I get a commision? LOL