Kawasaki KFX450 Forum :: KFX450HQ.com http://www.kfx450hq.com/forums KFX450HQ.com - The premiere Kawasaki KFX450 ATV enthusiast website and quad discussion forum. Many areas of interest for the Kawasaki KFX450 ATV/Quad such as Photos, Videos, Tuning, Accessories, Maintenance, Reviews and much more! en Thu, 09 Sep 2010 07:43:08 GMT vBulletin 60 http://www.kfx450hq.com/forums/images/misc/rss.jpg Kawasaki KFX450 Forum :: KFX450HQ.com http://www.kfx450hq.com/forums couple pics from laborday http://www.kfx450hq.com/forums/zbroz-racing/7222-couple-pics-laborday.html Thu, 09 Sep 2010 03:58:10 GMT Just thought I'd share a couple pics of laborday weekend. Was windy most of the weekend but we still got in a good ride or two. How did everyone elses weekend go??

]]> ZBroz Racing Zbroz Racing http://www.kfx450hq.com/forums/zbroz-racing/7222-couple-pics-laborday.html Launched A New Section On kbmATV.com http://www.kfx450hq.com/forums/kb-motorsports/7221-launched-new-section-kbmatv-com.html Thu, 09 Sep 2010 02:12:51 GMT We launched a new section on our website! We have a section solely dedicated to the UTV riders and uploaded several windshields, doors, winches,... We launched a new section on our website! We have a section solely dedicated to the UTV riders and uploaded several windshields, doors, winches, roofs, etc. We are adding parts daily including exhaust, engine, and suspension however, we are taking these categories slowly to prevent any mistakes. Once we have time to research the products in the exhaust, engine, and suspension category they'll be displayed.

Thanks!

UTV Parts ]]> KB Motorsports KB Motorsports http://www.kfx450hq.com/forums/kb-motorsports/7221-launched-new-section-kbmatv-com.html Need a rear bearing housing http://www.kfx450hq.com/forums/general-discussion/7220-need-rear-bearing-housing.html Thu, 09 Sep 2010 02:05:18 GMT I need a rear bearing housing urgently!!! I damaged mine and it can't be fixed... :( Where can I get it cheap??? *I'm from Puerto Rico* ]]> General Discussion Migue http://www.kfx450hq.com/forums/general-discussion/7220-need-rear-bearing-housing.html New Fuel Customs Intake with air box http://www.kfx450hq.com/forums/sale-wanted/7219-new-fuel-customs-intake-air-box.html Thu, 09 Sep 2010 00:20:00 GMT I have a New Fuel Fuel Customs black Intake with air box. It was installed on my quad but never started it quad with it on. It does not come with a... I have a New Fuel Fuel Customs black Intake with air box. It was installed on my quad but never started it quad with it on. It does not come with a air filter.

$175 for intake and air box
$125 for just the intake. ]]> For Sale/Wanted vtecteaser123 http://www.kfx450hq.com/forums/sale-wanted/7219-new-fuel-customs-intake-air-box.html How do you remote the front fender plastics? http://www.kfx450hq.com/forums/body-controls-protection/7218-how-do-you-remote-front-fender-plastics.html Wed, 08 Sep 2010 23:15:29 GMT I have 3 rivets on each side of my KFX450r and I was wondering is there any simple trick to removing the plastics for the front fenders? -Bobby I have 3 rivets on each side of my KFX450r and I was wondering is there any simple trick to removing the plastics for the front fenders?

-Bobby ]]> Body/Controls/Protection bobbyg35 http://www.kfx450hq.com/forums/body-controls-protection/7218-how-do-you-remote-front-fender-plastics.html 6 pack racks? http://www.kfx450hq.com/forums/body-controls-protection/7217-6-pack-racks.html Wed, 08 Sep 2010 20:37:54 GMT Anyone know of who makes these for the KFX? I saw one on rockymountain atv, but they want $100 for them. Anyone have them cheaper? Which... Anyone know of who makes these for the KFX?

I saw one on rockymountain atv, but they want $100 for them.

Anyone have them cheaper?
Which brands are best?
Anybody have a used one for sale?

Gonna be going to the dunes soon and need to carry some spare fuel and or drinks! ;-) ]]> Body/Controls/Protection OAS500 http://www.kfx450hq.com/forums/body-controls-protection/7217-6-pack-racks.html Jardine RT99 Full Exhaust Going Up 15.00 http://www.kfx450hq.com/forums/kb-motorsports/7216-jardine-rt99-full-exhaust-going-up-15-00-a.html Wed, 08 Sep 2010 17:37:41 GMT Jardine RT99 Full Exhaust Systems are going up 15.00 to cover extra expenses associated with the product lineup. Currently, they are 365.00 plus... Jardine RT99 Full Exhaust Systems are going up 15.00 to cover extra expenses associated with the product lineup. Currently, they are 365.00 plus 10.00 shipping. Friday September 10th they'll be 380.00 plus ten dollar shipping, and remember 10.00 is our flat rate shipping charge if you wanted to order 30 products from our website it's only $10.00 for the entire order.

KFX450 Performance Parts ]]> KB Motorsports KB Motorsports http://www.kfx450hq.com/forums/kb-motorsports/7216-jardine-rt99-full-exhaust-going-up-15-00-a.html Going to the Dyno Tomorrow! http://www.kfx450hq.com/forums/dyno-tuning-room/7215-going-dyno-tomorrow.html Wed, 08 Sep 2010 17:20:17 GMT Just found out that the only dyno within 3 hours is not going to be around after Friday.:( I guess there just isn't enough business to keep it. So it's time to bite the bullet and get it tuned. ]]> Dyno/Tuning Room skitzo433 http://www.kfx450hq.com/forums/dyno-tuning-room/7215-going-dyno-tomorrow.html wanted http://www.kfx450hq.com/forums/sale-wanted/7213-wanted.html Wed, 08 Sep 2010 15:31:10 GMT stock header pipe stock header pipe ]]> For Sale/Wanted Earl http://www.kfx450hq.com/forums/sale-wanted/7213-wanted.html Engine wanted http://www.kfx450hq.com/forums/sale-wanted/7212-engine-wanted.html Wed, 08 Sep 2010 14:44:00 GMT I have a buddy that is thinking of buying a 2008 KFX 450r that he found on Craig's List. The only problem is that it does not have a motor in it. Does anyone have or know of someone that wants to sell their motor? If so, how much? ]]> For Sale/Wanted tazz3069 http://www.kfx450hq.com/forums/sale-wanted/7212-engine-wanted.html Did i bend my rotor?? http://www.kfx450hq.com/forums/suspension-steering-chassis/7208-did-i-bend-my-rotor.html Wed, 08 Sep 2010 00:27:40 GMT Was unloading the KFX and i forgot my cheapo "anti theft" device was still on there.....
(a masterlock padlock through the holes on the rear rotor.)
Yea, lame i know, but i havent gotten anything better yet.

It kinda pushed under the stock plastic skidplate and i caught it before it turned so far as to hit the caliper.
So i put it on blocks to see if it looked bent, and i noticed just a hair of movement of the caliper.
(see lame video...LOL)


http://s82.photobucket.com/albums/j2...t=DSCF6032.mp4


Does this look normal?
Trouble is i never looked at it like this before, so i dont know if it was this way or not. ? ? ? ? ]]> Suspension/Steering/Chassis OAS500 http://www.kfx450hq.com/forums/suspension-steering-chassis/7208-did-i-bend-my-rotor.html Fuel Outwears size http://www.kfx450hq.com/forums/general-discussion/7207-fuel-outwears-size.html Tue, 07 Sep 2010 23:35:39 GMT Can anyone tell me what size outwears Fuel uses on their KFX450 intake. Mine rubbed a hole in it and the shipping from fuel is close to half the... Can anyone tell me what size outwears Fuel uses on their KFX450 intake. Mine rubbed a hole in it and the shipping from fuel is close to half the price. Would be nice to run to the local stop and pick one up quick. ]]> General Discussion CycloneISU http://www.kfx450hq.com/forums/general-discussion/7207-fuel-outwears-size.html Sellin the kfx http://www.kfx450hq.com/forums/general-discussion/7206-sellin-kfx.html Tue, 07 Sep 2010 23:07:23 GMT well, looks like my kfx is leaving me. i recently purchased this 2005 honda as a replacement: -Stage 1 Rossier built motor. Was just opened up... well, looks like my kfx is leaving me. i recently purchased this 2005 honda as a replacement:


-Stage 1 Rossier built motor. Was just opened up and completely went over. Rossier exhaust and UNI air filter
-Front PEP 8 click shocks on SMC Fab. +2 arms.
-Rear PEP modded shock.
-All shocks recently serviced by Seth at sf racing
-PEP steering dampener
-Fasst Flexx handlebars, rebuilt a month ago.
- Rath Nerfs
-durablue lock nut
-Laeger adjustable Axle-straight, not bent
-powermadd handguards
-Tm Designworks chain guide and new 2 week old chain
- A-arms, swinger and frame are white. Teixeira Tech gusset kit on frame.
- blingstar skid and grab bar
- Razr mx on hiper dual beadlocks on back, %80 tread
-razr cross fronts on rolled lip itp wheels, %80 tread
-Houser +1 anti-vibe stem
-gripper seat cover
-dg national bumper

i will accept any honda slurs i get but im selling my kfx and i will sell it saying that i had a great time on my kfx and had no complaints. will have pics up of the kfx in about a week if anyone is interested. it has pro aluminum nerfs, pro circuit slip on, and a maeir race hood
Attached Images
File Type: jpg getattachment4567.jpg (52.5 KB)
]]> General Discussion stutzmanracing http://www.kfx450hq.com/forums/general-discussion/7206-sellin-kfx.html Precision Shock and Vibe handlebar set http://www.kfx450hq.com/forums/tqs-atv/7205-precision-shock-vibe-handlebar-set.html Tue, 07 Sep 2010 18:25:48 GMT We now have these in stock in both 7/8" and 1 1/8" bar sizes. These seem to be a great alternative to flexx bars for a softer feel on the bars.

http://tqsatv.com/proddetail.php?pro...-HANDLEBAR-SET








]]> TQS ATV TQS ATV http://www.kfx450hq.com/forums/tqs-atv/7205-precision-shock-vibe-handlebar-set.html GBC heartland challenge http://www.kfx450hq.com/forums/zbroz-racing/7204-gbc-heartland-challenge.html Tue, 07 Sep 2010 17:49:32 GMT After 10 hrs of non-stop racing two Zbroz Racing supported teams finished very well. The pro team lead by Jarrod McClure and Jeff Pickens Finished... After 10 hrs of non-stop racing two Zbroz Racing supported teams finished very well. The pro team lead by Jarrod McClure and Jeff Pickens Finished 3rd in there respective class.

In the Pro Am class Bryan Hulsey, Jon Pitts, and Mike Burrows won easily and finished 3rd overall showing they had the consistency and speed needed to run with the top pro's. Great job to everyone!
]]> ZBroz Racing Zbroz Racing http://www.kfx450hq.com/forums/zbroz-racing/7204-gbc-heartland-challenge.html