 |
|

09-02-2010, 01:05 AM
|
 |
Senior Member
|
|
Join Date: Oct 2009
Location: Lake Havasu city, Arizona
Posts: 2,857
|
|
Quote: Originally Posted by battle
Had the issue with it turning over and not getting any spark, solved that one and now it starts fine, runs for about 3 seconds and dies. Just idling or giving it gas doesnt matter, PLEASE HELP
After it dies, does it re-start, then dies again, and only runs for three second each time it starts????
What did you do to fix the last issue????
It sounds like a broken wire or a bad connection from your stators pick-up sensor, For ignition spark.
That makes contact then separates due to the vibration of the motor running...
Start at the pick-up sensor that's positioned over the fly-wheel on the shifter-side of your crank case and make sure it's mounted securely it might be loose!!!
Then check the wires and their connections..
The connection for your pick-up sensor are found over the radiator's reservoir tank...I'll provide a photo if you can't find it...
Last edited by Dust Devil; 09-02-2010 at 01:24 AM.
|

09-02-2010, 01:09 AM
|
 |
Senior Member
|
|
Join Date: Mar 2009
Location: North Carolina
Posts: 6,013
|
|
Quote: Originally Posted by battle
swapped em out and thats not the problem, guessing im not goin to be up and ready to roll by friday 
I am thinking real hard for you.
I will post as soon as I can come up with something...
I'm thinking it could be so many things....
__________________
CIRCUS RUNAWAYS RACING #450R_
Procom ECU
'08 KX Cams
Custom Intake
Jardine RT99 Exhaust
Moose Racing Handguards
ProArmor Tether & Install Kit
ProArmor PowerGRIP System
ProArmor full skid protection
Pro(blem)Armor Dominator Bumper
Walsh lower stem bearing
Derisi Racing Suspension
CCP Steering Stabilizer
Maxxis Razr & Razr2
2011 Sponsors: Circus Runaways Racing, Dust Devil, ForceFed, James Racing, Attack Graphics, Custom CNC Parts, Procom, Jardine, Wicked Thunder, Keepitroostin.com
|

09-02-2010, 01:15 AM
|
 |
Senior Member
|
|
Join Date: Mar 2009
Location: North Carolina
Posts: 6,013
|
|
|
What was wrong causing the lack of spark before?
You never said... that might be a crucial clue...
__________________
CIRCUS RUNAWAYS RACING #450R_
Procom ECU
'08 KX Cams
Custom Intake
Jardine RT99 Exhaust
Moose Racing Handguards
ProArmor Tether & Install Kit
ProArmor PowerGRIP System
ProArmor full skid protection
Pro(blem)Armor Dominator Bumper
Walsh lower stem bearing
Derisi Racing Suspension
CCP Steering Stabilizer
Maxxis Razr & Razr2
2011 Sponsors: Circus Runaways Racing, Dust Devil, ForceFed, James Racing, Attack Graphics, Custom CNC Parts, Procom, Jardine, Wicked Thunder, Keepitroostin.com
|

09-02-2010, 01:49 AM
|
|
Junior Member
|
|
Join Date: Oct 2007
Posts: 23
|
|
Check ur kill switch with the vibrations of the motor it might be cutting the spark
|

09-02-2010, 02:42 AM
|
 |
Senior Member
|
|
Join Date: Mar 2009
Location: North Carolina
Posts: 6,013
|
|
|
So I been thinking and here is what I have come up with so far...
Simple Things
Check all grounds
Check connector on key switch wire
Open velcro bag under hood by key switch and check connections in there.
Take apart thumb switch and look for issues
Things know to KILL the bike
Battery issue (even a slightly loose cable will kill instantly)
Regulator/Rectifier issue (check connector and perform inspections)
Fuel pump issue (check power at connector in front of tank)
Crank sensor issue (check connector over rad bottle & perform inspections of sensor)
Ignition coil issue (recheck coil and perform inspections of coil windings)
Roll Sensor (recheck)
Throttle position sensor (inside usable range of 0.2v ~ 4.8v... but incorrect adjustment)
__________________
CIRCUS RUNAWAYS RACING #450R_
Procom ECU
'08 KX Cams
Custom Intake
Jardine RT99 Exhaust
Moose Racing Handguards
ProArmor Tether & Install Kit
ProArmor PowerGRIP System
ProArmor full skid protection
Pro(blem)Armor Dominator Bumper
Walsh lower stem bearing
Derisi Racing Suspension
CCP Steering Stabilizer
Maxxis Razr & Razr2
2011 Sponsors: Circus Runaways Racing, Dust Devil, ForceFed, James Racing, Attack Graphics, Custom CNC Parts, Procom, Jardine, Wicked Thunder, Keepitroostin.com
|

09-02-2010, 10:31 PM
|
 |
Senior Member
|
|
Join Date: Oct 2009
Location: Lake Havasu city, Arizona
Posts: 2,857
|
|
Quote: Originally Posted by battle
Had the issue with it turning over and not getting any spark, solved that one and now it starts fine, runs for about 3 seconds and dies. Just idling or giving it gas doesnt matter, PLEASE HELP
Check your intake manifold & throttle-body rubber-Boot clamp for being loose....
It what holds your throttle-body to your cylinder head.....
|

09-03-2010, 01:02 AM
|
 |
Senior Member
|
|
Join Date: Mar 2009
Location: North Carolina
Posts: 6,013
|
|
Quote: Originally Posted by Dust Devil
Check your intake manifold & throttle-body rubber-Boot clamp for being loose....
It what holds your throttle-body to your cylinder head.....
Yep... had that one happen to me too... LOL...
D@mn throttle body fell right out.
It acted pretty erratic right before it came all the way out...
Seems like the engine speed ran way up and stuff like that...
__________________
CIRCUS RUNAWAYS RACING #450R_
Procom ECU
'08 KX Cams
Custom Intake
Jardine RT99 Exhaust
Moose Racing Handguards
ProArmor Tether & Install Kit
ProArmor PowerGRIP System
ProArmor full skid protection
Pro(blem)Armor Dominator Bumper
Walsh lower stem bearing
Derisi Racing Suspension
CCP Steering Stabilizer
Maxxis Razr & Razr2
2011 Sponsors: Circus Runaways Racing, Dust Devil, ForceFed, James Racing, Attack Graphics, Custom CNC Parts, Procom, Jardine, Wicked Thunder, Keepitroostin.com
|

09-10-2010, 12:35 AM
|
|
Junior Member
|
|
Join Date: Sep 2010
Posts: 4
|
|
ok im dieing to find this out i have the EXACT SAME PROBLEM on my 08 its all stock except uni filter and hmf slip on . i had same probem with spark problem mine was coil . ok now i have great spark. this is how mine acts .
turn key on , starts right up, runs absolutly perfect , fuel pump running the whole time , spark is great while running, they both stop exactally same time of engine shutting off, not them shut off then dies it is exactally all at same time. imreally not thinking broke wire. im thinking more like something in computer telling it to just shut off at exactally 3 seconds, EVERYTIME, even tried to rev it up revs perfect runs great for "3" sec. it can idle or run open still exact results . FI light not on . took apart kill swich its clean and perfect. all connections have been cleaned grounds also, you can start it 100 times in a row with out turning key off or on off or kill swich onn off , tried all combinations still same result every single time it runs 3 sec shuts off fires right back up . im clueless and ready to set it on fire, this quad has been nothing but a nightmare. i just bought it from my buddy that hasnt even put 20 hours on it since new it has sit in garage. please help before i push it down a mountain. do i have bad computer do i need to buy new one or can it be hooked to computer to be fixed . anthing helps can repl to me @ andytwo1ks@live.com since ill be traveling next couple days and wont be able to get on here but ill have quad with and i need this thing running before next weekeend or i have to let her go please please
Last edited by demoandy; 09-10-2010 at 07:36 AM.
|

09-10-2010, 01:40 AM
|
 |
Senior Member
|
|
Join Date: Mar 2009
Location: North Carolina
Posts: 6,013
|
|
|
I sent you a message to that address and got a delivery failure...
Did you make an error?
__________________
CIRCUS RUNAWAYS RACING #450R_
Procom ECU
'08 KX Cams
Custom Intake
Jardine RT99 Exhaust
Moose Racing Handguards
ProArmor Tether & Install Kit
ProArmor PowerGRIP System
ProArmor full skid protection
Pro(blem)Armor Dominator Bumper
Walsh lower stem bearing
Derisi Racing Suspension
CCP Steering Stabilizer
Maxxis Razr & Razr2
2011 Sponsors: Circus Runaways Racing, Dust Devil, ForceFed, James Racing, Attack Graphics, Custom CNC Parts, Procom, Jardine, Wicked Thunder, Keepitroostin.com
|

09-10-2010, 07:35 AM
|
|
Junior Member
|
|
Join Date: Sep 2010
Posts: 4
|
|
yes was very tired last night but my email is andytwo1ks@live.com i would really like some help on this one guys
|
 |
|
Lower Navigation
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Search tags for this page |
|
dominator quad does not get spark on one coil, how fast the a kfx450 start turn the motor, kawasaki kfx450r throttle position sensor for sale, kawasaki kxf 400 coil problems, kfx 450 ignition coil, kfx 450 starts fine and then dies after about 3 secs. even, kfx450 dies, kfx450 dies after starting, kfx450 not getting spark, kfx450 only runs for 3 seconds, kfx450 runs for ten seconds then dies, kxf400 tps setting
Click on a term to search our sites for related topics.
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|