Power commander

This is a discussion on Power commander within the Engine/EFI/Drivetrain forums, part of the KFX450 Performance category; i know this is a must for an '08 kfx 450 but i don't know if i should get a: -two brother's juice box -dynatek ...


Go Back   Kawasaki KFX450 Forum :: KFX450HQ.com > KFX450 Performance > Engine/EFI/Drivetrain

Engine/EFI/Drivetrain Discuss engine, fuel injection, air intake, and drivetrain modifications here.

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 03-15-2010, 10:22 PM
palomino6294's Avatar
Senior Member
 
Join Date: Jan 2010
Posts: 212
View palomino6294's Photo Gallery(0)
Power commander

i know this is a must for an '08 kfx 450 but i don't know if i should get a:

-two brother's juice box
-dynatek f.i controller
-power commander iii
-power commander v


let me know what you got on your kfx and something that is good & where to buy!
Thanks in advance(:
(I GOT A TWO BROTHERS EXHAUST ON MY KFX)
__________________
- Elka Stage 4's
- Houser +2 A-Arms
- Full Exhaust

- Procom ECU (fully programmable)
- Hiper Beadlocks All Around!
- UM Racing Air Box
- K&N Air Filter
- Trinity Racing Intake
- Pro Armor Nerf Bars
- Pro Armor Pro Race Grab Bar
- Pro Armor Skid Plate Plates
- Maier One Piece Plastics
- QuadTech Seat
- LTR Tube
- TRP Hood
Reply With Quote
Sponsored Links
KFX450HQ.com is the premier Kawasaki KFX Forum on the internet. Registered Users do not these ads. Please Register - It's Free!    
  #2 (permalink)  
Old 03-15-2010, 10:35 PM
kfxbryan's Avatar
Senior Member
 
Join Date: Feb 2009
Location: VA
Posts: 474
View kfxbryan's Photo Gallery(3)
Don't waste your time with the first two but in reality you don't need a fuel controller at all yet unless you get a new intake. You will probably have more power now without a programmer with just a pipe upgrade.

I have the PC3 but would probably go with the 5 if they had it available at the time when I bought mine. It smaller, gives more options and is about the same price..
__________________
* FCI w/box.
* Curtis Sparks exhaust.
* PC3.
* Elka Elite front and rear.
* Quadtech MX seat.
* Monster graphic kit.
* ITP T9 .190 black front and rear.
* Maxxis Razr2 front and rear.
* Renthal chain.
* 15T front sprocket.
* AC Blackline nerf bars.
* Pro Armor skid plates.
* DG Fat V Pro bumper
Reply With Quote
  #3 (permalink)  
Old 03-15-2010, 11:19 PM
6789olds's Avatar
Senior Member
 
Join Date: Feb 2009
Posts: 337
View 6789olds's Photo Gallery(0)
x2 on that get a pc5 and a fuelcustoms intake or fuel intake and hold on .
__________________
fci intake
dmc dual comp exhaust
dobect fuel controller
stick stabilizer .
hid lights
rear wheel spacers.
asv
15/38
quadtech hood.
pro armor skids
pro armor bumper
proarmor heelgaurds fat pegs
proarmor nerfs
skat trak extreme 21x12x8 6 paddle
Reply With Quote
  #4 (permalink)  
Old 03-15-2010, 11:48 PM
palomino6294's Avatar
Senior Member
 
Join Date: Jan 2010
Posts: 212
View palomino6294's Photo Gallery(0)
i have a intake and i full exhaust, so i need a power commander v?

oh and the full exhaust i have is the Two Brothers M-7 Series so thats why i put the Two Brother's Juice Box.
__________________
- Elka Stage 4's
- Houser +2 A-Arms
- Full Exhaust

- Procom ECU (fully programmable)
- Hiper Beadlocks All Around!
- UM Racing Air Box
- K&N Air Filter
- Trinity Racing Intake
- Pro Armor Nerf Bars
- Pro Armor Pro Race Grab Bar
- Pro Armor Skid Plate Plates
- Maier One Piece Plastics
- QuadTech Seat
- LTR Tube
- TRP Hood

Last edited by palomino6294; 03-15-2010 at 11:51 PM.
Reply With Quote
  #5 (permalink)  
Old 03-15-2010, 11:54 PM
6789olds's Avatar
Senior Member
 
Join Date: Feb 2009
Posts: 337
View 6789olds's Photo Gallery(0)
its not so much the filter its the tube its self that flows the extra air
__________________
fci intake
dmc dual comp exhaust
dobect fuel controller
stick stabilizer .
hid lights
rear wheel spacers.
asv
15/38
quadtech hood.
pro armor skids
pro armor bumper
proarmor heelgaurds fat pegs
proarmor nerfs
skat trak extreme 21x12x8 6 paddle
Reply With Quote
  #6 (permalink)  
Old 03-16-2010, 12:41 AM
palomino6294's Avatar
Senior Member
 
Join Date: Jan 2010
Posts: 212
View palomino6294's Photo Gallery(0)
Quote: Originally Posted by 6789olds View Post
its not so much the filter its the tube its self that flows the extra air
yeah i got a new intake,air box, and filter
__________________
- Elka Stage 4's
- Houser +2 A-Arms
- Full Exhaust

- Procom ECU (fully programmable)
- Hiper Beadlocks All Around!
- UM Racing Air Box
- K&N Air Filter
- Trinity Racing Intake
- Pro Armor Nerf Bars
- Pro Armor Pro Race Grab Bar
- Pro Armor Skid Plate Plates
- Maier One Piece Plastics
- QuadTech Seat
- LTR Tube
- TRP Hood
Reply With Quote
  #7 (permalink)  
Old 03-16-2010, 01:02 AM
6789olds's Avatar
Senior Member
 
Join Date: Feb 2009
Posts: 337
View 6789olds's Photo Gallery(0)
Quote: Originally Posted by palomino6294 View Post
Quote: Originally Posted by 6789olds View Post
its not so much the filter its the tube its self that flows the extra air
yeah i got a new intake,air box, and filter
its a trinity intake ?
__________________
fci intake
dmc dual comp exhaust
dobect fuel controller
stick stabilizer .
hid lights
rear wheel spacers.
asv
15/38
quadtech hood.
pro armor skids
pro armor bumper
proarmor heelgaurds fat pegs
proarmor nerfs
skat trak extreme 21x12x8 6 paddle
Reply With Quote
  #8 (permalink)  
Old 03-16-2010, 02:55 AM
Senior Member
 
Join Date: Nov 2009
Posts: 113
View phrozin's Photo Gallery(0)
I have all the mods on my kfx i had a power commander 3 messed around with it for 2 months never got it right, i took it off to much pissing around with maps that are not quite right and stuck on a dynatek no where near the crap to tune it in just take the seat off a slite tweak where she needs it and a way she go's.

is a pc3 or pc5 a must nope mine sits in the tool box
Reply With Quote
  #9 (permalink)  
Old 03-16-2010, 03:18 AM
palomino6294's Avatar
Senior Member
 
Join Date: Jan 2010
Posts: 212
View palomino6294's Photo Gallery(0)
Quote: Originally Posted by 6789olds View Post
Quote: Originally Posted by palomino6294 View Post
Quote: Originally Posted by 6789olds View Post
its not so much the filter its the tube its self that flows the extra air
yeah i got a new intake,air box, and filter
its a trinity intake ?
yes sir its a trinity
__________________
- Elka Stage 4's
- Houser +2 A-Arms
- Full Exhaust

- Procom ECU (fully programmable)
- Hiper Beadlocks All Around!
- UM Racing Air Box
- K&N Air Filter
- Trinity Racing Intake
- Pro Armor Nerf Bars
- Pro Armor Pro Race Grab Bar
- Pro Armor Skid Plate Plates
- Maier One Piece Plastics
- QuadTech Seat
- LTR Tube
- TRP Hood
Reply With Quote
  #10 (permalink)  
Old 03-16-2010, 03:19 AM
palomino6294's Avatar
Senior Member
 
Join Date: Jan 2010
Posts: 212
View palomino6294's Photo Gallery(0)
Quote: Originally Posted by phrozin View Post
I have all the mods on my kfx i had a power commander 3 messed around with it for 2 months never got it right, i took it off to much pissing around with maps that are not quite right and stuck on a dynatek no where near the crap to tune it in just take the seat off a slite tweak where she needs it and a way she go's.

is a pc3 or pc5 a must nope mine sits in the tool box
so what are you saying?
__________________
- Elka Stage 4's
- Houser +2 A-Arms
- Full Exhaust

- Procom ECU (fully programmable)
- Hiper Beadlocks All Around!
- UM Racing Air Box
- K&N Air Filter
- Trinity Racing Intake
- Pro Armor Nerf Bars
- Pro Armor Pro Race Grab Bar
- Pro Armor Skid Plate Plates
- Maier One Piece Plastics
- QuadTech Seat
- LTR Tube
- TRP Hood
Reply With Quote
Reply

Lower Navigation
Go Back   Kawasaki KFX450 Forum :: KFX450HQ.com > KFX450 Performance > Engine/EFI/Drivetrain


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Search tags for this page

dynojet power commander 3 for 2010 kfx maps

,

how to use the buttons on a dynojet power commander on kfx450

,

kawasaki 450 with two brother and k&n filter what map for power commander

,

kfx450 dynateck vs power commander

,

kfx450 trinity power commander

,

power commander trinity

Click on a term to search our sites for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
power commander lilguy450 Dyno/Tuning Room 1 09-12-2009 10:07 PM
power commander 5 RPV309 Engine/EFI/Drivetrain 2 04-24-2009 10:45 AM
Power Commander help? dkbmx256 Dyno/Tuning Room 2 03-31-2009 10:17 PM
Power commander? jake1221 Engine/EFI/Drivetrain 5 03-17-2009 09:47 AM
power commander? 1fast450r Engine/EFI/Drivetrain 7 10-30-2008 08:07 PM


Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.