450 fuel pump not working help

[douglas]

i was out rideing took a break bike would not start ? noticed that fuel pump was not working. back at the shop trouble shooting involved looking for fuse ? i cannot fide the location of the 10 amp fuse. if someone can tell me where it is ???
removed tank did a voltage check relay is switching on sending power to the pump at the plug terminal. removed the pump, checked for continuity with ohm meter through wireing in pump there was none.....
ok so it looks like pump is junk ??? this bike is 09 i bought it new zero hours on it never started. out of warrente in december.
HELP??????? am i over looking something ?? whereis that fuse/ even so i have power at the terminal plug that goes into the pump.

[ononewheel]

remove the hood on the left side theres a bundled group of harnesses in a black wrap which is zip tied and velcroed together!undo that and youll see the two fuses one is your fan the other fuel pump each has a spare so change it and you should be ok!its kinda hard to access from just removing the hood u may be able to do it from underneeth the front fender or remove the whole front fender thats much easier to work!

[douglas]

thanks for the info on fuse location i have pulled the plastics from the bike when we were working on it and opened up the black wraps on both sides and did not see the fuses i will loiok again in that area. are these standard type looking fuses if so i should hsve spotted them there were 2 of us working on this bike not beginners but always looking for education. thank you

[ononewheel]

there in i think an orange type holder which has a cover just pop off they are smaller than normal but its in the pack of wires on the left side of bike kinda under the main fuse block!