How to adapt the LTR tube?

[fastjunkie131]

borich is using the stock ltr intake tube and box with a motor combo like the suzuki mx guys from yosh and is putin out 60hp. so that ltr tube will flow enough.

[Duster]

Oh... you are going to be way floored when you see what I have come up with for it.

I just hope and pray there is enough room for it.
Gotta get my d@mn bike back so I can take some measurements.

It might just give everything a run for the money in the intake business.
I think some folks are going to wish they jumped on this and snatched it up for production.

Gotta get the dang bike home though, get it all together and find a dyno.

[kawa x]

Muaha. i wanna see what you came up with i just put my new intake on but i can't find the cable to go from my phone to the computer to upload a photo of it...

[Duster]

God... I hope this combo can fit!!!!

KFX should be back here in the PM so I can do some measurements to find out.

[kawa x]

Nice, me too good luck and keep posting.

[Pupdaddy]

I'm running a ltr tube and it's on a pro flo air filter runs great just had to saddle out the front of the air box

[walshyfz86]

I think best way to home make it. get a 2" inch pipe and cut it to adapt the stock 45 to the ltr tube. Then call dasa and get a dasa intake ring. Fuel atv uses a dasa ring i think you can pick it up for 40-50$. And mount that to your stock air box. Or you can use a 3 1/4" pipe and run that trough the airbox from the ltr tube and mount filter onto that.

[Duster]

Quote: Originally Posted by walshyfz86

I think best way to home make it. get a 2" inch pipe and cut it to adapt the stock 45 to the ltr tube. Then call dasa and get a dasa intake ring. Fuel atv uses a dasa ring i think you can pick it up for 40-50$. And mount that to your stock air box. Or you can use a 3 1/4" pipe and run that trough the airbox from the ltr tube and mount filter onto that.

I've got a better idea, that I believe will yield a good bit more power... IF IT WILL FIT!

I didn't get my KFX back today as the servicing dealer expected.
So I still have not been able to check.

[trelle1268]

Seen this done with a LTR boot and the LTR proflow filter adapter. The adapter has the mounting for the intake sensor in it. The aluminum bracket is fitted into the trimmed stock box. This setup also gives you a much larger filter. Seemed to work very well.