 |
|
08-24-2010, 09:21 PM
|
|
Senior Member
|
|
Join Date: Mar 2009
Posts: 3,122
|
|
|
at last!!! dyno tune!!
haha well not yet but! i just dropped my bike off at a local race shop DFR or Dirt Fiend Racing, they are a well known shop and the owner Rudy used to ride pro, he has been on a few race teams in different positions and he they are the shizz! I need my bike back by the weekend so he is gonna tune it up, if time allows he is going to slap on some other exhausts to compare on the same quad and dyno same day. But thats only if they can get to that.
Will have numbers posted up by the weekend hopefully!
Tune will be for a full TDC exhaust, fci with box , pc3 and stg 2 hot cams
im super excited!
__________________
08 black kfx450
-PC3
-FCI w/box
-6k hids
-Odi grips
-Thumb extender
-Pro armor front bumper
-Precision steering stabilizer
-Terry Design Concepts Full Exhaust
-Pro Armor fat pegs
-Gibson +1 steering stem powder coated red
-Powermadd hand guards
-Renthal 15t f/s
-EX quadratech X-ring chain
-Tires: Rear-Razr2 21inch Front Razr2 22 inch
|
08-24-2010, 10:32 PM
|
 |
Senior Member
|
|
Join Date: Sep 2008
Location: IN
Posts: 575
|
|
Im gonna say 29 HP to the crank, 19 to the rear wheels with about 22 ft lbs of torque  !
Haha just messin bro, can't wait to see the results!
__________________
2008 Kawasaki KFX 450r:
-HiPer
-Hoosier Mx tires
-Fasst Flexx Bars
-EK
-PC III
-Rath Racing nerfs/heel gaurds
-nMotion Full Exhaust
-FCI
-RPM Dominator II Axle
-Pro Design
-ASV Levers
-Engine Ice
-Quadtech Hump Seat
-Houser Racing
|
08-24-2010, 10:44 PM
|
|
Senior Member
|
|
Join Date: Mar 2009
Posts: 3,122
|
|
|
ya im hoping they have enough time to slap on some other exhausts! from what he was showing me on Kody Evans practice bike the tdc and dasa were identical numbers so we shall see with the kawi!
__________________
08 black kfx450
-PC3
-FCI w/box
-6k hids
-Odi grips
-Thumb extender
-Pro armor front bumper
-Precision steering stabilizer
-Terry Design Concepts Full Exhaust
-Pro Armor fat pegs
-Gibson +1 steering stem powder coated red
-Powermadd hand guards
-Renthal 15t f/s
-EX quadratech X-ring chain
-Tires: Rear-Razr2 21inch Front Razr2 22 inch
|
08-27-2010, 09:21 PM
|
|
Senior Member
|
|
Join Date: Mar 2009
Posts: 3,122
|
|
|
well got my bike back, this dyno reads stock bikes about the low 30's so its not a bad run, curve looks pretty good and the difference is like WOW
picked up 3.77 hp and the bottom end pulls like a beast!
hard to see cause i had to take the pics with my phone, the dark red line is the final curve
mods are TDC full exhuast, pc3, fci with box, and stg 2 hotcams
__________________
08 black kfx450
-PC3
-FCI w/box
-6k hids
-Odi grips
-Thumb extender
-Pro armor front bumper
-Precision steering stabilizer
-Terry Design Concepts Full Exhaust
-Pro Armor fat pegs
-Gibson +1 steering stem powder coated red
-Powermadd hand guards
-Renthal 15t f/s
-EX quadratech X-ring chain
-Tires: Rear-Razr2 21inch Front Razr2 22 inch
|
08-28-2010, 12:11 AM
|
|
Member
|
|
Join Date: Aug 2010
Location: Las Vegas, Nevada
Posts: 91
|
|
|
I just dropped off mine today. I will be adding the Procom ECU and the FCI intake. I already have a set of hot cams, Sparks Racing Exhaust, and a 13 tooth front sprocket. Then only things they are taking off is the Mod Quad intake and the Dobeck TFI controller. I should get it back by Tuesday. I will post the results.
__________________
2008 KFX 450r, Full Sparks Racing Exhaust, Hot Cams, FCI, Procom ECU, Z-Broz full suspension
|
08-28-2010, 12:16 AM
|
|
Senior Member
|
|
Join Date: Mar 2009
Posts: 3,122
|
|
|
damnu run a 13 up front? i run a 15 and i have a hard time keeping the front end down
__________________
08 black kfx450
-PC3
-FCI w/box
-6k hids
-Odi grips
-Thumb extender
-Pro armor front bumper
-Precision steering stabilizer
-Terry Design Concepts Full Exhaust
-Pro Armor fat pegs
-Gibson +1 steering stem powder coated red
-Powermadd hand guards
-Renthal 15t f/s
-EX quadratech X-ring chain
-Tires: Rear-Razr2 21inch Front Razr2 22 inch
|
08-28-2010, 08:44 AM
|
|
Member
|
|
Join Date: Aug 2010
Location: Las Vegas, Nevada
Posts: 91
|
|
|
We goto Dumont Dunes, in Calif, and race up Comp Hill. The 13 tooth made a huge difference going up the hill. I am hoping with the new mods, it will be alot faster. If I cant keep the front down, I will put the stock sprocket back on and see what happens.
__________________
2008 KFX 450r, Full Sparks Racing Exhaust, Hot Cams, FCI, Procom ECU, Z-Broz full suspension
|
08-28-2010, 09:09 AM
|
|
Senior Member
|
|
Join Date: Mar 2009
Posts: 3,122
|
|
|
hmm i go to glamis and gordons and i never had much issue on the hills, i was taking olds in 3rd
__________________
08 black kfx450
-PC3
-FCI w/box
-6k hids
-Odi grips
-Thumb extender
-Pro armor front bumper
-Precision steering stabilizer
-Terry Design Concepts Full Exhaust
-Pro Armor fat pegs
-Gibson +1 steering stem powder coated red
-Powermadd hand guards
-Renthal 15t f/s
-EX quadratech X-ring chain
-Tires: Rear-Razr2 21inch Front Razr2 22 inch
|
08-28-2010, 02:50 PM
|
 |
Premium Member
|
|
Join Date: Feb 2009
Location: warwick,RI
Posts: 3,035
|
|
|
nice results!
__________________
- 2009MONSTER ENERGY EDITION
- 2008 stock kfx
- h.i.d.s w/relays
pro armor skid powder coated swing arm tusk nerfs fmf full exhaust fci intake/pcV/dyno tuned fox floats gII evol l/t shocks/podium rear asv levers 15 tooth f/s 37 tooth r/s ims 3.7 gallon gas tank tech 3 hipers front/rear razor xc's front/rears houser slicast mgc +2.25 a arms kawi green asr fx stem lsr twin row carrier gforce adjustable axle rekluse w/cover odi clamp on grips/custom start/headlight switches tag polyurithane belly skid alba case saver cv4 green radiator hoses engine ice coolant walsh steering stem joint kx cams streamline stabalizer
trail tech vapor
|
08-28-2010, 03:19 PM
|
|
Senior Member
|
|
Join Date: Mar 2009
Posts: 3,122
|
|
|
trying to find someone with a scanner near me so its actually readable! but ya im very happy with what they did, pulls like a beast now!
__________________
08 black kfx450
-PC3
-FCI w/box
-6k hids
-Odi grips
-Thumb extender
-Pro armor front bumper
-Precision steering stabilizer
-Terry Design Concepts Full Exhaust
-Pro Armor fat pegs
-Gibson +1 steering stem powder coated red
-Powermadd hand guards
-Renthal 15t f/s
-EX quadratech X-ring chain
-Tires: Rear-Razr2 21inch Front Razr2 22 inch
|
|
|
Lower Navigation
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Search tags for this page |
|
07 yfz 450 high compression dyno numbers, 450r on alcohol, 513 ice cube 4 mil stroker kit, 565 yfz 450 kit, custom yfz 450 2007, drag yfz450, kfx 450 power adders, kfx450r hot rods 4 mil stroker crank, minotaur 565 stroker kit, pics of custom yfz 450s, trx 450r drag bike, trx450r override transmission, yfz 450 crankshaft kit, yfz 450 drag, yfz 565, yfz 565 dyno, yfz 565 horsepower, yfz 565 kit, yfz minotaur kit, yfz450 on alcohol
Click on a term to search our sites for related topics.
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
