Quote: Originally Posted by
al capone
Quote: Originally Posted by
AZkfx450rider
it is reccomended by SEVERAL Shops that you put a base map on that is close to good and then the auto tune will adjust from there
Kinda wat I was thinking too. I'm gonna do some more reading and I'll do my best to learn these systems so I can help later too.
O another thing can I just put the bung right before my exhaust pipe where its stainless?
The whole (Stock) header pipe is titanium, and the slip-on is mild steel...
Unless you've purchased an after market one...If so! check with the manufactures spec's on their product....The best location is the near the exhaust port/manifold to prevent the outside air to contaminate the O2/sniffer reading....If your talking about installing your "Bung" near the clamp of your slip-on/muffler??
Air can get in around the "Clamp" and contaminate the exhaust gases causing a "false reading"....Good Luck!!
Linear Mode
