PC-V Map for fci with box and stock exhaust

BigJ · #1 (**permalink**) 05-30-2009, 08:23 PM

Looking for a map to use for the pc-v with stock exhaust with baffle out and the fci intake with box. I will be ordering a new exhaust soon but was looking for something close to run until then. Thanks

AZkfx450rider · #2 (**permalink**) 05-30-2009, 08:32 PM

well im not sure how different the pcv is but im runing my pc3 with a map for fci and dasa, even tho im still running stock exhaust, it will work until i get my exhaust

BigJ · #3 (**permalink**) 05-31-2009, 09:40 PM

I think i'm going to try this map for it from powercommander web site. M17-014-011 DG Bullet slip-on, K&N air filter kit, Air box lid removed. Looks like it would be close. Can't wait tell i order the esr exhaust and the autotune. Probly gonna be in the next couple weeks.

mike127 · #4 (**permalink**) 06-01-2009, 12:03 AM

i thought with the new pc5 u dont need a map u drill a hole in the exshaust and mount the sensor and it does the map for u

BigJ · #5 (**permalink**) 06-01-2009, 12:16 AM

yeah, if you buy the auto tune add on. Its like another $200 for the autotune. I plan on gettting it when I get my new exhaust just wanted to get close for time being tell i get it.

sw1tched · #6 (**permalink**) 06-24-2009, 11:05 AM

were you able to find a map?

I need the same one. (CFM intake with box& K&N, stock exhaust with baffle out, and PCV)

greenKFX08 · #7 (**permalink**) 06-30-2009, 04:01 PM

Quote: Originally Posted by BigJ

Looking for a map to use for the pc-v with stock exhaust with baffle out and the fci intake with box. I will be ordering a new exhaust soon but was looking for something close to run until then. Thanks

I need the same one also, any luck???

sw1tched · #8 (**permalink**) 06-30-2009, 04:18 PM

nope... still on the hunt. I'll probably end up using the one BigJ recommends if I cant find a closer one:
M17-014-011 DG Bullet slip-on, K&N air filter kit, Air box lid removed

BigJ · #9 (**permalink**) 07-03-2009, 10:21 PM

The one i listed seems to be running pretty good, haven't done alot of riding but it seems like it is better than the one fuelmoto sent on it. Got an esr full exhaust coming this week so it worked for me while i used it. Also I had the baffle out and it ran better than with it in.

sw1tched · #10 (**permalink**) 07-03-2009, 11:31 PM

bought my kfx used... didnt come with the baffle

havent received my PCv or my intake yet, so its still runnin stock. hopefully I'll have both on monday.