Dyno results with KX Cams installed

This is a discussion on Dyno results with KX Cams installed within the Dyno/Tuning Room forums, part of the KFX450 Performance category; Ok, just got my quad back with the kx cams installed, had some real nice pick up as expected in the mid/top end range. You ...


Go Back   Kawasaki KFX450 Forum :: KFX450HQ.com > KFX450 Performance > Dyno/Tuning Room

Dyno/Tuning Room Post all your dyno/tuning information here!

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 05-13-2008, 07:55 PM
Senior Member
 
Join Date: Jan 2008
Location: Anthem AZ
Posts: 509
View offroadhunter's Photo Gallery(0)
Ok, just got my quad back with the kx cams installed, had some real nice pick up as expected in the mid/top end range. You can see the gains start around 6500 and maintain 2hp over stock cams all the way through, just under 1lb of torque as well. Very Nice! Also another item to note, when I had it dyno'd a few months ago the max HP was 44.43, today pre install was 44.11, seems funny but the dyno results can clearly vary from day to day..Air/fuel was a very steady 13:1 Took it out for a quick ride and felt awesome!
Attached Images
File Type: gif kxcamdyno.gif (160.2 KB, 152 views)
Reply With Quote
Sponsored Links
KFX450HQ.com is the premier Kawasaki KFX Forum on the internet. Registered Users do not these ads. Please Register - It's Free!    
  #2 (permalink)  
Old 05-13-2008, 08:19 PM
Senior Member
 
Join Date: Apr 2008
Posts: 1,756
View shadey's Photo Gallery(0)
[attachment=1117ost_454...07338328.gif]

a couple of pony's is pretty good

what compression are you running?
Attached Images
File Type: gif post_4548_1207338328.gif (1.0 KB, 58 views)
Reply With Quote
  #3 (permalink)  
Old 05-13-2008, 08:50 PM
Senior Member
 
Join Date: Jan 2008
Location: Anthem AZ
Posts: 509
View offroadhunter's Photo Gallery(0)
<div class='quotetop'>QUOTE (shadey @ May 13 2008, 04:19 PM) <{POST_SNAPBACK}></div>
Quote:
[attachment=1117ost_454...07338328.gif]

a couple of pony's is pretty good

what compression are you running?[/b]
Yea, you are right, it's much better than the stock 36ish for sure.... No changes to the compression (nor did I ask them to check it for me), does it normally need to be checked with these mods?
Reply With Quote
  #4 (permalink)  
Old 05-13-2008, 09:03 PM
Senior Member
 
Join Date: Apr 2008
Posts: 1,756
View shadey's Photo Gallery(0)
no but generally a HC piston will make a bigger difference with big cams than with out so I wanted to know if you had a 13 or 14:1 piston.
Reply With Quote
  #5 (permalink)  
Old 05-13-2008, 09:06 PM
Senior Member
 
Join Date: Jan 2008
Location: Anthem AZ
Posts: 509
View offroadhunter's Photo Gallery(0)
<div class='quotetop'>QUOTE (shadey @ May 13 2008, 05:03 PM) <{POST_SNAPBACK}></div>
Quote:
no but generally a HC piston will make a bigger difference with big cams than with out so I wanted to know if you had a 13 or 14:1 piston. [/b]
Ok, for the record..i'm done with the engine mods.......of course next dune season i might change my mind but for now, nothing else new (aside from nerf bars, 6pack rack, and a few others)
Reply With Quote
  #6 (permalink)  
Old 05-13-2008, 09:10 PM
Senior Member
 
Join Date: Apr 2008
Posts: 1,756
View shadey's Photo Gallery(0)
what kind of fuel do you run?
Reply With Quote
  #7 (permalink)  
Old 05-13-2008, 09:13 PM
Senior Member
 
Join Date: Jan 2008
Location: Anthem AZ
Posts: 509
View offroadhunter's Photo Gallery(0)
<div class='quotetop'>QUOTE (shadey @ May 13 2008, 05:10 PM) <{POST_SNAPBACK}></div>
Quote:
what kind of fuel do you run?[/b]
Arizona's best...91..but for the frequency that I ride I can certainly afford to blend some higher octane (if i'd get any benefit from it)
Reply With Quote
  #8 (permalink)  
Old 05-13-2008, 09:16 PM
Senior Member
 
Join Date: Apr 2008
Posts: 1,756
View shadey's Photo Gallery(0)
Ah hell you could run AVgas from Deer Vally airport it's like $4.25 a gal

were do you dyno at

Reply With Quote
  #9 (permalink)  
Old 05-13-2008, 09:25 PM
Senior Member
 
Join Date: Jan 2008
Location: Anthem AZ
Posts: 509
View offroadhunter's Photo Gallery(0)
Up in Anthem, Action Motorsports...
Reply With Quote
  #10 (permalink)  
Old 05-13-2008, 10:48 PM
dl11sec70dodge's Avatar
Senior Member
 
Join Date: Jul 2007
Location: so.cal
Posts: 611
View dl11sec70dodge's Photo Gallery(0)
<div class='quotetop'>QUOTE (offroadhunter @ May 13 2008, 04:25 PM) <{POST_SNAPBACK}></div>
Quote:
Up in Anthem, Action Motorsports...[/b]
right on par with mine....looks good
__________________
951-743-6328

HESPERIA CA. 92345 MOBILE DYNO TUNING Specializing in EFI QUADS AND DIRT BIKES!!
DEALER FOR DYNOJET, WEB CAMS, FCI INTAKE, and many more!!!

WWW.HIGHDESERTDYNO.COM
Reply With Quote
Reply

Lower Navigation
Go Back   Kawasaki KFX450 Forum :: KFX450HQ.com > KFX450 Performance > Dyno/Tuning Room


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Search tags for this page

kfx 450 cams dyno

,

kfx 450 dyno results

,

kfx450r kx cams

,

kx dyno 450

Click on a term to search our sites for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heading to the dyno again and need some CAMS Screamin_Yeller_400EX Engine/EFI/Drivetrain 11 10-31-2008 01:02 AM
installed hot cams gangsta_50_08@yahoo.com Engine/EFI/Drivetrain 9 10-09-2008 11:16 PM
Just installed cams william88 Engine/EFI/Drivetrain 18 06-14-2008 08:56 PM
MY DYNO RESULTS.....FROM FCI IN POMONA CA. dl11sec70dodge Dyno/Tuning Room 13 05-30-2008 08:08 PM
Dyno Results cty50328 Dyno/Tuning Room 3 03-31-2008 10:58 PM


Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 01:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.